CMZ - CNC Lathe manufacturer - TL Series CNC Lathes

| NEWS | PRODUCTS | SERVICE | SALES NETWORK | DOWNLOADS

Integrated Spindles refrigerated with oil.

Higher precision.
Better surface finish.
Better roundness
Less noise
Longer life.

TL SERIES CNC LATHES
Machine	Chuck diameter	Maximum turning diameter	Z axis travel	Spindle power (max/cont)	Bar capacity
TL15	160 mm	400 mm	640 mm	14/8 kw	46 mm
TL15M	160 mm	400 mm	640 mm	14/8 kw	46 mm
TL15S	160 mm	400 mm	640 mm	14/8 kw	46 mm
TL15SM	160 mm	400 mm	640 mm	14/8 kw	46 mm

TL20	210 mm	400 mm	640 mm	22/15 kw	66 mm
TL20M	210 mm	400 mm	640 mm	22/15 kw	66 mm
TL20S	210 mm	400 mm	640 mm	22/15 kw	66 mm
TL20MS	210 mm	400 mm	640 mm	22/15 kw	66 mm

TL25	250 mm	400 mm	640 mm	35/19 kw	66 mm
TL25AM	250 mm	400 mm	640 mm	35/19 kw	66 mm
TL25AS	250 mm	400 mm	640 mm	35/19 kw	66 mm
TL25AMS	250 mm	400 mm	640 mm	35/19 kw	66 mm

TL25B	250 mm	400 mm	640 mm	40/25 kw	77 mm
TL25BM	250 mm	400 mm	640 mm	40/25 kw	77 mm
TL25BS	250 mm	400 mm	640 mm	40/25 kw	77 mm
TL25BMS	250 mm	400 mm	640 mm	40/25 kw	77 mm

The turret disk does not lift during clamp and unclamp.

The turret is unclamped on retract and is clamped on approach.
This reduces significantly the chip to chip time.