Dual-spindle CNC Lathe_TTS Series_PC
Dual-spindle CNC Lathe_TTS Series_MOB

TTS Series

Dual-Spindle CNC lathe for parts made from bar

The TTS Series is part of the range of multi-turret machines for bar turning. It is the smallest lathe in the CMZ product range. Ideal for machining complex parts due to its precision and reliability. This CNC machine is the preferred option of companies dedicated to bar turning because significantly reducing cycle times, it is specially designed for high production. It is a dual-spindle CNC lathe for bar turning without belts and turret with 12,000 rpm driven tools fully cooled that, thanks to the movements in the X3 and Z3 axes, can work with the sub-spindle offset off centre, machine with two turrets on the same spindle, cut simultaneously with 3 tools, work with tailstock or synchronize machining with two turrets (the movement of one turret is programmed and the other follows). A dual-spindle CNC lathe aimed at the bar turning industry.

Turning workshop. Dual-spindle CNC lathe.PC

13 kW, 27 Nm, 12,000 rpm

TURRET WITH DRIVEN TOOLS

The TTS Series completes the range of CMZ multi-turret CNC machines. In this dual-spindle CNC lathe, competition of sliding head lathes, the two 24-position turrets hydraulically clamp onto a large diameter curvic coupling giving great stability and precision. 

Integrated spindles with synchronous motors

Acceleration time reduced by half

The integrated spindles of this dual-spindle CNC lathe equip the machine with key technical characteristics for maximum performance and productivity. Acceleration time reduced by half: Its high-power, high-torque motors reduce acceleration time by half. The TTS-46 reaches 5000 rpm in 1.75 seconds.

Multiple configuration options

Dual-Spindle CNC lathe TTS Series

TTS 38 / TTS 46 / TTS 52 / TTS 66 Models

TTS SERIES

1 turret, 2 channels

Max. bar diameters: Ø38 Ø46 Ø52 Ø66

TTS SERIES

2 Turrets, 3 Channels

Max. bar diameters: Ø38 Ø46 Ø52 Ø66

FUNCTIONALITIES

Discover the exclusive functionalities of this dual-spindle CNC lathe thanks to the movements in the X3 and Z3 axes

3 axis dual spindle cnc lathe
3 axes dual spindle cnc lathe
TTS tailstock

Tailstock: Operating simultaneously with sub-spindle (option)

One of the options of this fixed-headstock cnc lathe is the tailstock attached to the sub-spindle. The TTS allows the tailstock to be incorporated above or below the spindle. With this machine configuration, it is possible to machine between the chuck or the main chuck and the tailstock while finishing the part in the sub-spindle.

3 tools working simultaneously

The TTS can work with 3 tools simultanously

This dual-spindle lathe designed for bar turning has two turrets, although the CNC has 3 channels allowing 3 programs to be run simultaneously with their corresponding offsets. The sub-spindle (axes X3 and Z3) can work in the third channel of the CNC in a compound mode with the upper and lower turret. In this way, it is possible to place two tools in both turrets and machine with three tools simultaneously

Machining very long components

THE LINEAR MOVEMENT OF THE SUB-SPINDLE REDUCES INTERFERENCES

Mecanizado de piezas largas en Serie TTS: Desplazamiento subcabezal

TTS SERIES VS OTHER DUAL-SPINDLE LATHES

Comparison of dual-spindle lathes

Which is the best fixed head lathe for you?

Examples of machined parts

Bushing

Bushing

Conexión Pin

Connection pin

Male Stud Body

Male stud body

Punch

Punch

Demo Connector

Demo connector

CONTACT US AND REQUEST AN OFFER WITHOUT COMMITMENT

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.